AUTOAR4.2.2FiM配置容器20230711A

AUTOAR4.2.2FiM配置容器，FiMGeneral和FiMConfigSet的知识。

FiM

• FiMGeneral
  • FiMAvailabilitySupport
    • This configuration parameter specifies, if the Fim shall support the service to set the Availabity of a Funtionality. true: Service is supported. false: Service is not supported
    • EcucBooleanParamDef
  • FiMDataFixed
    • Enable or disable calibration of inhibit relations The scope of the parameter is to meet the requirement (FIM008) to have the option to calibrate inhibit data on the one hand side and also to provide the option to protect inhibit data for consistency reasons.
    • EcucBooleanParamDef
  • FiMDevErrorDetect
    • EcucBooleanParamDef
  • FiMEventUpdateTriggeredByDem
    • This configuration parameter specifies the way FIM obtains status of EventIds. TRUE: the DEM informs FIM about changes of event status, FALSE: the FIM polls event status from the DEM module either cyclically or on demand.
    • EcucBooleanParamDef
  • FiMMaxEventsPerFidInhibitionConfiguration(0..1)
    • EcucIntegerParamDef
  • FiMMaxFiMInhibitionConfigurations(0..1)
    • EcucIntegerParamDef
  • FiMMaxInputEventsPerSummaryEvents(0..1)
    • EcucIntegerParamDef
  • FiMMaxSummaryEvents
    • EcucIntegerParamDef(0..65535)
  • FiMTaskTime(Obsolete)
    • EcucFloatParamDef(0.0.1)
  • FiMVersionInfoApi
    • EcucBooleanParamDef
• FiMConfigSet
  • FiMFID(1..*)
    • This container includes symbolic names of all FIDs
    • FiMFunctionId
      • Unique identifier of a FimFunctionId. This parameter should not be changeable by user, because the Id should be generated by Fim itself to prevent gaps and multiple use of an Id.
      • EcucIntegerParamDef(0..65535)
  • FiMInhibitionConfiguration(1..*)
    • This container includes all configuration parameters concerning the relationship between event and FID.
    • FiMInhInhibitionMask
      • The configuration parameter is used to specify the inhibition mask for an event - FID relation. Last Failed - DEM_UDS_STATUS_TF flag of Dem Eventstatus is set Use case: Reconfiguration, avoiding follow-up errors Not Tested this cycle - DEM_UDS_STATUS_TNCTOC flag of Dem Eventstatus is set. Use case: Scheduling of monitors. Tested - DEM_UDS_STATUS_TNCTOC flag of Dem Eventstatus is not set. Use case: Self deactivation, check during driving cycle. Tested and Failed - DEM_UDS_STATUS_TF flag of Dem Eventstatus is set and DEM_UDS_STATUS_TNCTOC flag is not set Use case: Avoiding deadlocks, repeated monitoring.
      • FIM_LAST_FAILED
      • FIM_NOT_TESTED
      • FIM_TESTED
      • FIM_TESTED_AND_FAILED
    • FiMInhComponentRef(0..*)
      • Reference to a DemComponent which is necessary for function permission. At least one FiMInhSumRef or FiMInhEventRef or FiMInhComponentRef needs to be configured.
      • Reference to [ DemComponent ]
    • FiMInhEventRef(0..*)
      • Selection of an single DEM Event. At least one FiMInhSumRef or FiMInhEventRef or FiMInhComponentRef needs to be configured.
      • Symbolic name reference to [ DemEventParameter ]
    • FiMInhFunctionIdRef
      • Reference to [ FiMFID ]
    • FiMInhSumRef(0..*)
      • Selection of a summarized Event. At least one FiMInhSumRef or FiMInhEventRef or FiMInhComponentRef needs to be configured.
      • Reference to [ FiMSummaryEvent ]
  • FiMSummaryEvent(0..*)
    • The summarized EventId definition record consists of a summarized event ID and specific Dem Events. This record means that a particular FID that has to be disabled in case of summarized event (defined above) is to be disabled in any of the specific events. A possible solution could be assigning events as summarized events along with a list of specific events. During the configuration process the summarized event substitutes the referenced single events. However, it is not outlined how this requirement is solved - whether by configuration process or by implementation within the FiM. The FiM configuration tool could also build up a suitable data structure for summarized events and deal with it in the FiM implementation.
    • FiMInputEventRef(1..*)
      • Symbolic name reference to [ DemEventParameter ]